Nanotechnology
Ihsan Ali; Ameen D. Thamer; Faras Q. Mohammad
Abstract
High strength low alloy steel (HSLAS) is quite sensitive to hydrogen embrittlement due to its different phases. This study investigated the hydrogen embrittlement (HE) behavior of uncoated, physically vapor deposition (PVD) coated, and chemically vapor deposition (CVD) coated HSLAS. The XRD indicates ...
Read More ...
High strength low alloy steel (HSLAS) is quite sensitive to hydrogen embrittlement due to its different phases. This study investigated the hydrogen embrittlement (HE) behavior of uncoated, physically vapor deposition (PVD) coated, and chemically vapor deposition (CVD) coated HSLAS. The XRD indicates the formation of ZnO, Zn(N3)2, γN and C3N4 phases at the outer coating layer. The results show that combination of surface nitriding and zinc deposition are efficient method against hydrogen embrittlement. This could be attributed to the reduction of hydrogen that is generated by the reaction of surface Zn) N3)2 phase and the low rate of hydrogen transport through the γN phase. The coatings were tested by immersing the tensile samples in a diluted H2SO4 solution with water for 24 hours. Additionally, the result shows that combined coating resulting in higher tensile strength, yield stress, and tensile elongation compared to uncoated samples. Hardness results indicate that the combined coatings (PVD + CVD) has the higher value of about 258 HV, followed by the uncoated sample of about 218 HV, while the PVD only coated sample have the lower hardness value of about 175 HV.
Nanotechnology
Israa F. Hasan; Khawla S. Khashan; Aseel A. Hadi
Abstract
Titanium dioxide nanoparticles were produced in this work by laser ablation of a high purity titanium objective immersed in distilled water. Optical and structural properties of the obtained TiO2 NPs using a Q-switched Nd: YAG laser of 1064nm wavelength with different laser energy (80, 100, 120, 140, ...
Read More ...
Titanium dioxide nanoparticles were produced in this work by laser ablation of a high purity titanium objective immersed in distilled water. Optical and structural properties of the obtained TiO2 NPs using a Q-switched Nd: YAG laser of 1064nm wavelength with different laser energy (80, 100, 120, 140, and 160) mJ at 100 pulses was studied. The produced TiO2 NPs were characterized employing UV-VIS Spectrophotometer, X-ray diffraction, and scanning electron microscopy (SEM). The obtained TiO2NPs showed a decrease in transmittance in the region of the UV spectrum and an increase in the visible spectrum region. The estimated optical band gap of the TiO2NPs was 3.89eV, 3.8eV, and 3.70eV at 80, 120 and 160mJ laser energy, respectively. The as-produced TiO2NPs appear to be a Brookite crystalline phase with the preferential orientation along (200) direction. The scanning electron microscopy assays showed that the TiO2 NPs have a cauliflower shape. Results show that with increasing the energy of laser pulse, the size of nanoparticles was increased noticeably. Where the particle size and its morphology are affected by laser energy.
Nanotechnology
Saja H. Salim; Riyad H. Al-Anbari; Adawiya Haider
Abstract
Due to low water fluxes, commercial ultrafiltration (UF) membranes used in water treatment need to be improved. High-quality UF membranes were fabricated from polysulfone (PSF)/titanium dioxide (TiO2) nanocomposite fibers as substrates using the spray pyrolysis method. The influence of nano-TiO2 on the ...
Read More ...
Due to low water fluxes, commercial ultrafiltration (UF) membranes used in water treatment need to be improved. High-quality UF membranes were fabricated from polysulfone (PSF)/titanium dioxide (TiO2) nanocomposite fibers as substrates using the spray pyrolysis method. The influence of nano-TiO2 on the UF nanocomposite membrane was studied. Scanning electron microscopy (SEM), contact angle, and porosity were evaluated to characterize the mechanical characteristics of the membranes. The results show that adding TiO2 to the substrates increased the hydrophilicity and porosity of the substrates. The pure water flux of the Thin Film Nanocomposite (TFN) membrane manufactured utilizing a PSF substrate coated with 0.1 wt% TiO2 nanoparticles (denoted as Pc 0.1) improved at a rate of 35.28 l/m2.h, and for a PSF substrate coated with 0.2 wt% TiO2 nanoparticles (denoted as Pc 0.2) improved at a rate of 44 l/m2.h. Additionally, increasing TiO2 nanoparticle loading to 0.1 and 0.2 wt. percent resulted in higher water flow over 20 l/m2.h PSF commercial membrane. The results of the UF performance show that Pc 0.2 membrane offered the most promising results, with a high-water flux than commercial membranes without nano-TiO2 (Pc).
Nanotechnology
Duha S. Hassan; Mehdi Zayer
Abstract
The polycrystalline thin films were deposited on glass substrate at room temperature by pulsed laser deposition PLD technique. The effects of annealing treatment by used the Oil Thermal Annealing (OTA) process on the structural, optical and electrical properties of ZnO thin film films were investigated. ...
Read More ...
The polycrystalline thin films were deposited on glass substrate at room temperature by pulsed laser deposition PLD technique. The effects of annealing treatment by used the Oil Thermal Annealing (OTA) process on the structural, optical and electrical properties of ZnO thin film films were investigated. The film structure was investigated by X-ray diffraction to indicate that the heat treatment after the OTA process gives the optimized condition of crystalline. The transmission spectrum of the film was measured by UV-V is spectrophotometer, and the Urbach energy and forbidden band width were calculated. The surface topography of the film was observed by scanning electron microscopy (SEM) image of the ZnO thin film at the OTA process shows the changes in the shape and size of the grains. The atomic force microscopy (AFM) effect of heat treatment was demonstrated by the change in the surface roughness of the ZnO thin film. The electrical properties of thin film were optioned by Hall Effect technique. That these improvements in the ZnO thin film physical properties were annealing temperatures by OTA at 150 °C, 200 °C, 250 °C and 300 °C.
Nanotechnology
Muna H. Kareem; Adi M.; Haitham T. Hussein
Abstract
In this paper, Gas sensors for ethanol and methanol were created utilizing porous silicon (PSi).n-type silicon was employed for all PSi samples, photo-electrochemical etching technique (PECE) was used to prepare porous surface. The intensity of the three etchings current densities was 12, 24 and 30 mA ...
Read More ...
In this paper, Gas sensors for ethanol and methanol were created utilizing porous silicon (PSi).n-type silicon was employed for all PSi samples, photo-electrochemical etching technique (PECE) was used to prepare porous surface. The intensity of the three etchings current densities was 12, 24 and 30 mA / cm2, with 40% hydrofluoric acid concentration (HF) and a time of etching 10 minutes. Porous silicon (100) has been strictly studied by the structure and formation of surface bonding of the PSi layer; the structural properties, morphological characteristics, pore diameter, and roughness were described using X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM). All PSi samples were applied as a sensor for ethanol and methanol at room temperature. The results showed that the best sensitivity of PSi was to ethanol gas compared to methane under the same used conditions at etching current density 30mA/cm2, reaching about 1.809 at a concentration of 500 ppm. From these results, the PSi layers act as high-quality, low-cost gas sensors. It can be used as a replacement for expensive material that is used as gas sensors, which operate at low temperatures, including room temperature. The interest in this material is due to study the effect of extremely high surface to volume ratio (increasing surface area), and easy manufactured and compatibility with modern silicon microelectronics manufacturing technologies.
Nanotechnology
Barra L. Abbood; Khalid A. Sukkar; Jenan A. Al-Najar
Abstract
Air quality is an important factor for human breathing requirements. The presence of the particulate matter which is a mixture of solid particles and liquid droplets presence in atmosphere such as PM10 and PM2.5 in the indoor air leads to fatal problems for human health. In the present investigation, ...
Read More ...
Air quality is an important factor for human breathing requirements. The presence of the particulate matter which is a mixture of solid particles and liquid droplets presence in atmosphere such as PM10 and PM2.5 in the indoor air leads to fatal problems for human health. In the present investigation, two types of nanofilters (polyacrylonitrile PAN, 15wt.% and polyvinyl alcohol PVA 12wt.%) were synthesized using the electrospinning method. The polymeric solutions were prepared under high mixing conditions. The structural and morphological specifications of produced nanofibers were characterized using many measuring devices. Also, airflow characteristics across the prepared nanofilter were evaluated by designing and constructing an airflow apparatus. The apparatus consisted of two stainless steel sections and the middle zone was designed to fit the filter media. The characterization results indicated that the synthesized of PVA 12 wt.% nanofilter has uniform morphological distribution with fibers average diameter of 92 nm while the produced PAN with 15wt.% showed and an average fibers diameter of 556 nm. Moreover, the PVA nanofilter showed high-pressure values in comparison with the PAN filter. Interestingly, both filters provided high air permeability. Furthermore, the produced PAN nanofilter showed a high ability to capture the PM10 and PM2.5 due to the significant properties and specifications of nanofibers. Additionally, the produced nanofilter can be applied in air filtration processes effectively with low manufacturing costs.
Nanotechnology
Reem A. Saleh; Odai N. Salman; Mohammed O. Dawood
Abstract
In this work, well-oriented and homogeneous titanium dioxide (TiO2) nanorods (NRs) was synthesized by hydrothermal method. In this method, vertically aligned arrays of TiO2 were built on the conductive Fluorine–Tin–Oxide (FTO) glass substrate. Nanoparticles (NRs) of TiO2 showed a tetragonal ...
Read More ...
In this work, well-oriented and homogeneous titanium dioxide (TiO2) nanorods (NRs) was synthesized by hydrothermal method. In this method, vertically aligned arrays of TiO2 were built on the conductive Fluorine–Tin–Oxide (FTO) glass substrate. Nanoparticles (NRs) of TiO2 showed a tetragonal shape with a square top face, according to the image of the field emission scanning electron microscope (FE-SEM). The TiO2 NRs are polycrystalline, having two phases: rutile and anatase, according to X-ray diffraction (XRD) analysis. The optical properties of a TiO2 nanorods arrays were examined, including transmittance, absorption coefficient, and energy bandgap. An optical energy band gap of 3.18 eV was obtained. According to the photoluminescence emission measurement, the energy bandgap was 3.3 eV. For further study of the optical properties of the TiO2 Nanorods films, reflectance spectrum was used as a function of wavelength to estimate the value of the energy bandgap and its value was 3.45 eV. By comparing the values obtained from the three methods, it is found that they are closely alike, which confirms the formation of the TiO2 nanostructure.
Nanotechnology
Anwar Sabri Jawad; Qasim N. Thewaini; Sharafaldin Al-Musawi
Abstract
Aluminum oxide, often known as Al2O3, is a chemical compound of aluminum and oxygen with the formula Al2O3. It's the most common of many aluminum oxides, known as aluminum (III) oxide. The study investigates the cytotoxicity and antibacterial effects of Aluminum oxide nanoparticles (Al2O3-NPs) in different ...
Read More ...
Aluminum oxide, often known as Al2O3, is a chemical compound of aluminum and oxygen with the formula Al2O3. It's the most common of many aluminum oxides, known as aluminum (III) oxide. The study investigates the cytotoxicity and antibacterial effects of Aluminum oxide nanoparticles (Al2O3-NPs) in different cells and bacteria. Different characterization methods such as dynamic light scattering (DLS), field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) have been used to evaluate morphologies and physicochemical properties of Al2O3-NPs. MTT technique is used for determining NPs cytotoxicity. The size distribution of Al2O3-NPs was 68 ± 12 nm in diameter, while the zeta potential was (-36 ± 10 mV). There is no toxicity by using the MTT assay, as well as showed antibacterial activity was formed at 200 µg/mL, while the higher antibacterial activity was occurring at (18 ± 0.2) and (17 ± 0.1) for Proteus Vulgaris and Streptococcus pyogenes, respectively. The findings confirmed that the Al2O3-NPs have small dimensions, high stability, and increased antibacterial activity.
Nanotechnology
Khaled Chahrour; Poh Choon Ooi; April Azlan Hamzah
Abstract
By applying dual anodization procedures of aluminum (Al) thin film over silicon substrate under controlled anodizing process conditions, a thin anodic alumina (AAO) pattern with hexagonal honeycomb-like arrangement nano-pores and highly-regular aligned arrays was created. Anodizing DC voltage was thought ...
Read More ...
By applying dual anodization procedures of aluminum (Al) thin film over silicon substrate under controlled anodizing process conditions, a thin anodic alumina (AAO) pattern with hexagonal honeycomb-like arrangement nano-pores and highly-regular aligned arrays was created. Anodizing DC voltage was thought to have an effect on pore size dimensions. With anodizing DC voltage, the pore diameter (30 - 110nm) showed a linear change. The rate of vertical growth of the nanopores was found to be proportional to the anodizing voltage. To achieve open-through pore nanostructure and ensure homogeneous electrochemical deposition of various nanostructures onto AAO pattern, a bottommost barrier layer of the AAO pattern was detached during dropping the DC voltage in the final period of the anodization process, followed by a pore widening wet treatment for numerous minutes at ambient temperature atmosphere. The features of the AAO pattern were inspected by using the field emission scanning microscope (FESEM) linked with an electron dispersive x-ray spectrometer (EDX) for chemical elements investigation.
Nanotechnology
Kahlaa H. Aboud; Natheer Jamal Imran; Selma M.H. Al-Jawad
Abstract
In this research, pure and 4%, Mn-doped thin films of cadmium sulfide (CdS) were synthesized using a 2-hour hydrothermal process. The effect of adding the dopant concentration on thesamples' structural, morphological, and optical characteristics were investigated. The ultraviolet-visible-NIR spectrophotometer ...
Read More ...
In this research, pure and 4%, Mn-doped thin films of cadmium sulfide (CdS) were synthesized using a 2-hour hydrothermal process. The effect of adding the dopant concentration on thesamples' structural, morphological, and optical characteristics were investigated. The ultraviolet-visible-NIR spectrophotometer was used to investigate the optical properties. UV-Vis experiments lowered the optical bandgap with an add Mn percentage. Their optical bandgap was 2.38 eV for undoped thin films and 1.81 eV for 4% doped Mn-CdS thin films. UV-Vis spectroscopy data are in agreement with PL. FE-SEM imaging revealed morphological changes caused by the inclusion of Mn in CdS thin films. FE-SEM displays images of undopedCdS,which appear to be Nanoparticles. Morphology of the thin films has shown that the average grain size increases by the agglomeration of Nano-grains, which become clusters of particles after Mn+2incorporation. In addition, The XRD pattern revealed that prepared samples H (002)/C (111) as hexagonal and cube phases have a preferential orientation. The increase in the main diffraction peak (002) intensity with increasing Mn concentration revealed the substitution of Mn+2 with Cd+2 in the lattice. The crystallite size increased from10.74 to 11.67 nm with an Mn percentage.
Nanotechnology
Maha A Al-Kinani; Adawiya Haider; Sharafaldin Al-Musawi
Abstract
Drug delivery using nanocarriers is recommended to decrease the drug amount. To improve the different therapeutic characteristics of curcumin (CU) such as solubility, bioavailability, maintenance endorsement, and make it a promising, successful antitumor drug used for prostate cancer treatment. It was ...
Read More ...
Drug delivery using nanocarriers is recommended to decrease the drug amount. To improve the different therapeutic characteristics of curcumin (CU) such as solubility, bioavailability, maintenance endorsement, and make it a promising, successful antitumor drug used for prostate cancer treatment. It was introduced to folate decorated chitosan (CS) coated Fe@Au NPs (FA-CU-CS-Fe@Au NPs). Fe@Au nanoparticle contains magnetic Fe NP’s core with a fine layer of Au NP’s synthesized using the method Pulsed, Laser, Ablation in Liquid (PLAL). These Fe@Au NP’s characterized by UV-Visible Spectrophotometer, High-Resolution, Transmission Electron Microscopy, (HRTEM), and Field Emission Scanning, Electron, Microscopy (FESEM). The smallest nanosize and the best result was obtained at different laser wavelength (532, 1064) nm. The mean size gained of Fe@Au NPs were (67.65, 77.88) nm. Obtained results exhibited that the laser wavelength plays a key role in the size, and dispersity of Fe@Au NPs. CU loaded FA-CS-Fe@Au NPs MTT assay on human prostate cancer cell line (PC3) proved that CU cytotoxicity can improve when they are loaded on (FA-CS-Fe@Au NPs) when comparing it with free CU.
